HACKING AN ARCADE MACHINE WITH A COIN ON A STRING - WILL IT WORK?
Vending World Vending World is a supplier of refurbished vending machines and vending machine parts.
On the web for 21 years from 1998 to 2019.
We are the largest seller of refurbished vending machines in California.
In total sales of used vending machines, refurbished vending machines and vending machine parts for the last ten years.
Vending World Facility In order to serve our customer better we have moved our facility to a new location in 2015.
Our new facility has been updated with a larger parts how vending machine coin slots work and many other features.
New to Vending We can help you get started in the vending business.
Visit our new users page for answers to more info how vending machine coin slots work your questions about the vending business.
Warranty All machines on our website come with a 90 day limited parts warranty to give you the peace of mind after the delivery of your machines.
Basic Instructions, Loading, Setting Prices, and General Information 1 After plugging machine into electrical power 117 volt, standard line power, make sure that the machine is set out from the wall at least 4-6 inches.
This will allow proper ventilation for the refrigeration unit.
Some models hold 2 cans deep, commit grease slot machine play online idea hold 3 cans deep.
Three can deep machines include-Vendo 480,570-Dixie Narco 501,600.
If the machine has double columns 2 cans wide then you need to be careful when loading these columns.
Double columns have a bar that moves back and forth Dixie Narco and pre-Univendor Vendo only when vending.
Make sure to load the cans on the high side of this bar.
Sometimes the high side is on the left; sometimes it is on the right so look into the column to see which side is the high side.
Most machines have loading instructions on the inside door panel, in case you get confused.
Priming is the process of getting cans down into the mechanism for initial vending.
Once the machine is primed the sold out switches will keep a few cans in the vend mechanism for next time.
All changer units have slots at the top of the change tubes, usually for nickels, dimes, and quarters TRC-6200 loads nickels, dimes only.
Make sure to manually load change into these tubes be careful to put the proper coins in the proper tubes.
Load tubes about half way up to start.
Coins will then load automatically when machine is vended.
After tubes are full then all excess coins will go to the cash box.
Without loading the changer with coins it will not make change for coins or dollar bills if the machine has a dollar bill validator.
This is called the food zone.
Should you need to make your drinks colder or warmer you can do so by adjusting the thermostat.
Adjustment procedures later in this booklet.
Basic troubleshooting 1 Problem: Machine will not vend, all money comes back see more coin return when inserted.
Possible solutions: Make sure machine has cans in it.
If entire machine is empty it will not vend.
Possible solutions: Make sure that the machine is loaded properly.
If any one column has a can jam due to improper loading or other reasons then the entire machine will be how vending machine coin slots work of service.
This notch is the home position.
Possible solutions: Make sure that there is change in all of the changer tubes 5,10,25 cent coins how vending machine coin slots work the changer TRC6200 nickels, dimes only needed.
Possible solutions: Make sure that the harness to the dollar validators has not come unplugged from the machine or the validators.
Possible solutions: Check lower fan to see if it is running.
If it is not running the thermostat could be turned off or bad.
The thermostat on Dixie Narco is usually located below motor cover in the right hand side of machine, below the can chute on the right wall of the cabinet.
Vendo machines have the thermostat located towards the rear wall of the cabinet below the can chute on the left hand side of the machine, right in front of the evaporator fins.
All of the way counterclockwise turns refrigeration off.
The farther you turn to the right the colder the machine gets.
Be careful not to turn too cold or cans will freeze.
Remember diet drinks freeze at a higher temperature than regular drinks.
Most machines have an electrical plug from the refrigeration unit plugged into a black box on the lower left hand side of the machine.
Unplug this plug and plug it into a heavy-duty extension cord.
If the compressor unit comes on along with lower fan then that basically proves that the thermostat has probably gone bad.
We hope that the above suggestions have been of help in setting up and maintaining your machine.
Price changes-Switch settings All single prices can drink machines use a variation of the switch shown above.
This switch is located in the changer unit, behind the coin mechanism.
The switch block is usually red in color and the switches themselves are usually white.
For Maka Premier units the switches are turned sideways, you must remove the cover plate on the right hand side of the changer.
To turn the switches on or off use the how vending machine coin slots work of a ballpoint pen.
Up is on and down is off.
The drawing of the switches shown below is set at 50 cents for demonstration purposes.
Below you will find a chart that shows the prices and the combinations of switch settings.
Some units use 8 switches instead of 6.
These spacers are on the rear wall of the cabinet inside the vend area.
Rotate the plate or guide on the disk to have only one notch open on a two deep how vending machine coin slots work machine or two notches open on a three deep can machine.
When loading be sure that bottles face caps towards the rear of the machine.
Make sure water vends properly out of the installed column.
Try to avoid these soft bottles or jamming could occur.
Brands that have bee tested and are known to work in vending machines are Arrowhead and Palomar.
If you experiment with other brands remember that jamming could occur.
Do not clear the jam with your hand when powered up as the motor could begin to spin after the jam is cleared and your fingers could become pinched in the cup as it turns.
In some cases multi price machines may require extra parts or kits to make bottles vend properly.
COIN PUSHER HACK! WIN MORE MONEY!!!!
The first modern coin-operated vending machines were introduced in London, England in the early 1880s, dispensing postcards.The machine was invented by Percival Everitt in 1883 and soon became a widespread feature at railway stations and post offices, dispensing envelopes, postcards, and notepaper.
Прошу прощения, что вмешался... У меня похожая ситуация. Давайте обсудим. Пишите здесь или в PM.
Я тоже возьму уж очень интересно.
Присоединяюсь. Я согласен со всем выше сказанным. Давайте обсудим этот вопрос.
Какие нужные слова... супер, блестящая мысль
Интересно пишешь - добавил блог в ридер
Женская красота, ето то без чего мир станет не интересным!Фотки класс!!!!!
Я думаю, что Вы ошибаетесь. Предлагаю это обсудить. Пишите мне в PM.